manualshive.com logo in svg

Hanna Instruments HI 902 Color, Quick Start Manual

Share
Download
Hanna Instruments HI 902 Color Quick Start Manual Download Page 247

25

TITRATION THEORY

Repeatability

The variation in sample measurements taken by a single person or instrument under
the same conditions.

Spectrophotometric Titration

A titration in which the endpoint is marked by a change in the color and/or color
intensity.

Stoichiometry

The quantitative relationship of the reactants and products in a chemical reaction.

Titrant

The chemical added in a titration that causes the given reaction to occur.

Titration

A quantitative, volumetric procedure used in analytical chemistry to determine the
concentration of an analyte in solution. The concentration of the analyte is determined
by slowly adding a titrant to the solution. As the titrant is added, a chemical reaction
between the titrant and the analyte occurs.

Titration Curve

A graph containing the physical data obtained for a titration. The data plotted is often
an independent variable (volume of titrant) vs. a dependent variable (pH of the solution).
From the titration curve, the equivalence point or endpoint can be determined.

www.ponpe.com

[email protected]

Summary of Contents for HI 902 Color

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands