manualshive.com logo in svg

Hanna Instruments HI 902 Color, Quick Start Manual

Share
Download
Hanna Instruments HI 902 Color Quick Start Manual Download Page 67

5-11

METHODS

To set the dosing volume, select 

Linear Dosing and enter the optimum dose.

Dosing volume ranges are:
5 mL burette

0.001   to

4.500  mL

10 mL burette

0.001   to

9.000  mL

25 mL burette

0.005   to

22.500 mL

5.5.5.2

Dynamic Dosing

The titrator determines the titrant dose by trying to maintain a certain potential change 

(delta E)

with each addition.
After a titrant dose, if the potential change is lower than the set

 delta E, the next dose will be

progressively increased until 

max Vol is attained. If the potential change is still lower than the

set value, the titration will continue with the 

max Vol doses.

After a titrant dose, if the potential change is higher than the set 

delta E, the next dose will be

progressively decreased until 

min Vol is attained. If the potential change is still higher than

the set value, the titration will continue with the

 min Vol doses.

The titrant is added in volumes

 

that depend on the proximity of the end point as shown in

the graph below.

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands