manualshive.com logo in svg

Hanna Instruments HI 902 Color, Quick Start Manual

Share
Download
Hanna Instruments HI 902 Color Quick Start Manual Download Page 39

3-5

USER INTERFACE

3.2.1.3

Arrow Keys

These keys have the following functions:

• Move the on-screen cursor.
• Increase and decrease the stirrer speed and other settings.
• In the alphanumeric screen, to select a character.
• Navigate through menu options.

3.2.1.4

Numeric Keys

Keys

 

to

 

Used for numeric entries.

Toggles between positive and negative values.

Decimal point.

Initiates entry of exponent for scientific notation.

3.2.1.5

Enter Key

Both 

, 

 keys perform the same functions:

• Accept alphanumeric data entry.
• Executes the default (underlined) virtual option key.

3.2.2

Display

The titrator has a large color graphical display. The main screen

 is shown below with short

explanations of the screen segments.

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands