manualshive.com logo in svg

Hanna Instruments HI 902 Color, Quick Start Manual

Share
Download
Hanna Instruments HI 902 Color Quick Start Manual Download Page 83

5-27

METHODS

5.5.13.3 Sample Calculations by Weight

This calculation is used when the concentration of an analyte is determined by the weight of
the sample. The results are based on the initial sample weight (in grams). When you choose
this formula, select the 

Titrant Unit first and then the Final Result Unit.

The titrator will calculate the results based on the selected units.
The titrator will provide the results based on the titrant and sample units selected.

Titrant Units:

M (mol/L)

moles/liter

N (eq/L)

equivalents/liter

g/L

grams/liter

mg/L

milligrams/liter

Final Result Units:

ppt (g/kg)

parts per thousand (grams/kilogram)

ppm (mg/kg)

parts per million (milligrams/kilogram)

ppb (µg/kg)

parts per billion (micrograms/kilogram)

% (g/100 g)

percentage in weight (grams/100 grams)

mg/g

milligrams/gram

mg/kg

milligrams/kilogram

mol/kg

moles/kilogram

mmol/g

millimoles/gram

eq/kg

equivalents/kilogram

meq/kg

milliequivalents/kilogram

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands