Hanna Instruments HI 902 Color Quick Start Manual Download Page 161

Page: 161 / 248

A1-3

APPENDIX 1

TECHNICAL SPECIFICATIONS

Range

- 2000.0 to 2000.0 mV

Resolution

0.1 mV

Accuracy

±0.1 mV

Range

- 2.000 to 20.000 pH

Resolution

0.1 / 0.01 / 0.001 pH

Accuracy

±0.001 pH

ISE

Range

1x10

-6

to 9.99x10

Resolution

1 / 0.1 / 0.01

Accuracy

±0.5% (monovalent ion)
±1.0% (divalent ion)

Temperature

Range

- 5.0 to 105.0 °C
23.0 to 221.0 °F
268.2 to 378.2 K

Resolution

0.1 °C / 0.1 °F / 0.1 K

Accuracy

±0.1 °C / ±0.4 °F / ±0.2 K

Burette Sizes

Resolution

0.001 mL

Accuracy

±0.005 mL (5 mL Burette)
±0.010 mL (10 mL Burette)
±0.025 mL (25 mL Burette)

Graphic Display

7.5” graphical color display with backlight.

Languages

English, Portuguese, Spanish.

Titration Methods

up to 100 (standard and user methods)

Burette size auto-detection and interchangeable burettes.

The titrator automatically

detects the size of the burette when it is slid in the pump assembly.

Propeller Stirrer with Programmable Stir Speed.

The stirring speed can be set

between 100 and 2500 RPM with 100 RPM resolution.

Flow Rate:

user-selectable (see Section

5.5.22 Volume/Flow Rate).

mV / pH / ISE Measurement modes.

Automatically Temperature Compensated pH Measurements.

pH Calibration

with up to 5 buffers using

Auto-Entry or Manual-Entry options; temperature

compensated buffers are stored internally for

Auto-Entry option.

Relative mV calibration:

single point offset.

ISE Calibration:

with up to 5 standards.

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Search results

Summary of Contents for HI 902 Color

Reviews:

Brands by name

Popular brands

Hanna Instruments HI 902 Color, Quick Start Manual

Search results

Summary of Contents for HI 902 Color

Reviews:

Brands by name

Popular brands