manualshive.com logo in svg

Hanna Instruments HI 902 Color, Quick Start Manual

Share
Download
Hanna Instruments HI 902 Color Quick Start Manual Download Page 140

8-4

AUXILIARY FUNCTIONS

8.1.1

Prime Burette

The 

Prime Burette option is used to mechanically fill the burette before starting a set of

titrations. The priming process consists of several cycles of filling and emptying the burette
with titrant.
Two rinse cycles of burette are shown in the figure below. The dispensing tube is connected
on the right side and the aspiration tube on the left side.

Note:

 Before starting this operation, the aspiration tube must be inserted in the titrant

bottle. A waste container should be placed under the dispensing tip to collect the
waste solution.

To prime the burette, select 

Prime Burette from the 

Burette

 screen. Enter the number of

rinses and press 

.

The number of burette rinses can be set between 1 and 5 (we recommend at least three
rinses to assure that the air bubbles are completely removed).

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands