manualshive.com logo in svg

Hanna Instruments HI 902 Color, Quick Start Manual

Share
Download
Hanna Instruments HI 902 Color Quick Start Manual Download Page 54

4-12

GENERAL OPTIONS

4.12

Setup Balance Interface

This screen allows the users to connect an analytical balance for automatic acquisition of
sample mass prior to titration or standardization.

The balance is connected to the titrator via RS 232 interface.
Press 

 to add a new balance to the list.

Press 

 to enable the balance interface feature.

Press 

 to disable the balance feature (automatic weight acquisition will be not available).

Press 

 to customize the serial communication parameters by accessing the 

Balance

Configuration

 screen.

Be sure that the settings on the titrator 

Balance Configuration menu match the settings for

your particular balance (baud rate, data bits, parity, stop bit number, request command
syntax). It may be necessary to change settings on your balance. Users should consult their
balance instruction manual.
Before leaving this screen be sure the connection with the balance is working properly by
pressing the 

 key.

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands