Hanna Instruments HI 902 Color Quick Start Manual Download Page 145

Page: 145 / 248

8-9

AUXILIARY FUNCTIONS

Sample Name Allows the sample name to be recorded in each report. The sample

name will increase by one, with each new titration or logging report,
if the last character is a number.

Company Name

Allows the company name to be recorded in each report.

Operator Name

Allows the operator name to be recorded in each report.

Electrode Name

Allows the electrode name to be recorded in each report.

Fields 1, 2, 3

Allows any additional information to be recorded in each report.

The fields must be selected from

Setup Titration Report

screen (see section

8.3.6 Setup

pH/mV/ISE and section 8.3.7 Setup Titration Report) in order to be displayed in the titration
report.

8.3.4

Instrumentation Data

Displays titrator configuration data.

Titrator Serial Number:

The serial number of the titrator base board.

Analog Board 1 (and/or 2) Serial Number:

The serial number of the analog board.

Pump 1 (and/or 2) Serial Number:

The serial number of the connected pump.

Titrator Software Version:

The current software version installed on the titrator.

Base Board Software Version:

The current software version present on the base board

of the titrator.

Pump 1 (and/or 2) Software Version:

The current software version for the pump.

Analog 1 (and/or 2) Calibration Date:

Manufacturer calibration date of the analog board.

Note:

If more than 1 year elapsed from the calibration date of the analog board 1 and/

or 2, the message

Analog 1 Calibration Due

and/or

Analog 2 Calibration

Due

will appear on the main screen. The analog board(s) need to be recalibrated.

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Search results

Summary of Contents for HI 902 Color

Reviews:

Brands by name

Popular brands

Hanna Instruments HI 902 Color, Quick Start Manual

Search results

Summary of Contents for HI 902 Color

Reviews:

Brands by name

Popular brands