manualshive.com logo in svg

Hanna Instruments HI 902 Color, Quick Start Manual

Share
Download
Hanna Instruments HI 902 Color Quick Start Manual Download Page 37

3-3

USER INTERFACE

3

USER INTERFACE

3.1

Start Up

Once the instrument is assembled and installed, follow the steps below to start the titrator:

• Connect the instrument to an outlet equipped with a ground wire. Make sure that

the voltage of the main power matches that specified by the titrator.

• Turn on the titrator from the power switch located on the back of the instrument.

• Wait until the titrator finishes the initialization process.

• Press 

 when prompted or wait a few seconds for titrator to start.

Note:

All the performed initialization processes must be successfully completed. If one of
them is terminated by a “Failed” message, restart the titrator from the power switch.
If the problem persists, contact your dealer.

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands