manualshive.com logo in svg

Hanna Instruments HI 902 Color, Quick Start Manual

Share
Download
Hanna Instruments HI 902 Color Quick Start Manual Download Page 61

5-5

METHODS

5.2.3

Restore the Standard Methods to the Manufacturer Settings

You can restore the standard methods to the manufacturer setting by highlighting a standard
method and pressing 

.

5.3

User Methods

These methods are defined by the user (usually by modifying a standard method).
The user methods can be developed in accordance with the requirements of the user. All
method parameters can be modified by the user.

5.3.1

Creating User Methods

To create a new user method start from a standard or user method and follow these steps:

• Press 

 from the main screen

.

• Using the 

 and 

 keys, highlight an existing method from the methods list.

• Press 

. A new user method will be generated.

• Press 

 to activate the new user method.

[email protected]

www.ponpe.com

Summary of Contents for HI 902 Color

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands