GSK GSK980TDc, Manual

Page: 443 / 470

Chapter 5 Diagnosis Message
421
Ⅲ
Connection
0 1 1 Spindle speed feedback data
0 1 2 Spindle speed maximum feedback data
0 1 3 Spindle 1 analog output value
0 1 4 Spindle 2 analog output value
0 4 8 X axis output pulse number
0 4 9 X axis actual output pulse number (FPGA actual output)
0 5 0 Y axis output pulse number
0 5 1 Y axis actual output pulse number (FPGA actual output)
0 5 2 Z axis output pulse number
0 5 3 Z axis actual output pulse number (FPGA actual output)
0 5 4 4
th
axis output pulse number
0 5 5 4
th
axis actual output pulse number (FPGA actual output)
0 5 6 5
th
axis output pulse number
0 5 7 5
th
axis actual output pulse number (FPGA actual output)
0 6 7 Spindle encoder counting
0 6 8 MPG counting
0 6 9
The pulse number from the time that X axis starts detecting PC signal to
PC signal is detected
0 7 0
The pulse number from the time that Y axis starts detecting PC signal to
PC signal is detected
0 7 1
The pulse number from the time that Z axis starts detecting PC signal to
PC signal is detected
0 7 2
The pulse number from the time that 4
th
axis starts detecting PC signal
to PC signal is detected
0 7 3
The pulse number from the time that 5
th
axis starts detecting PC signal
to PC signal is detected
0 7 4 The times of system powering off
0 7 5 The times of system undervoltage (when the power is not off)
0 7 6
The times of insufficient time for data saving when the system is
undervoltage
5.1.3 Diagnosis keys
DGN.016
～
DGN.022 are the diagnosis messages of edit keypad keys; DGN.024
～
DGN.029 are
the diagnosis messages of machine operation panel keys. When pressing a key in the operation
panel, the corresponding bit displays “1”, and “0” after releasing this key. If it displays reversely, it
means there is a fault in the keypad circuit.
0 1 6 RST O N G P/Q 7 8 9
Key
0 1 7 PGU X Z
U W 4 5 6
Key
0 1 8 PGD H/Y F/E R/V D/L 1 2 3
Key
0 1 9 CRU RIGHT I/A J/B K/C - 0 .