GSK GSK980TDc, Manual

Page: 274 / 470

GSK980TDc Turning CNC System User Manual
254
Ⅱ
Operation
7.5.6 Locking and unlocking the offset value
In order to protect the offset value to be operated by mistaken, the offset values can be put into
lock, the operation steps are as follows:
1) Move the cursor to the location of the offset number to be locked;
2) Press the key, the current offset value will be backlighted for locking, which is
forbidden to alter, press the key again, the locking may be cancelled. No.1 tool offset
is locked as follows:
Note: The tool wear values can’t be locked.
7.5.7 No.0 tool offset moving workpiece coordinate system
When No.012 Bit 6 is set to 1, No. 0 tool offset moving workpiece coordinate system is valid.
After the value is input in No. 0 tool offset, the workpiece coordinate system executes the offset
based on the input value.