GSK GSK980TDc, Manual

Page: 325 / 470

Chapter 14 Machining Example
305
Ⅱ
Operation
14) Switch to TOOL OFFSET window, move the cursor to No.003 offset and input X135 Z0;
15) Move the tool to a safe position, and to change the No. 004 tool;
16) Move the tool to the toolsetting point, as point A in the following figure;
17) Switch to tool offset, move the cursor to No.004 offset and input X135 Z0;
18) Move the tool to a safe position after the toolsetting is finished;
19) Start the machining in Auto mode;
20) If there is any error between the designed and the actual dimensions, the tool offset may be
altered till the part dimensions are within the tolerance.
Note: Press key to make the auto running to pause if dwell is needed during the machining. Also if
emergency occurs, the user presses the key, Emergency stop button to cut off the power to
terminate the program running.