GSK GSK980TDc, Manual

Page: 289 / 470

Chapter 10 Data Setting, Backup and Restore
269
Ⅱ
Operation
c) Input the new password, and then press ;
d) The CNC prompts “ Input the new password again”;
e) Input the new password again and then press . When the two input passwords
are identical, the CNC prompts “Password has been altered, please save the new
password.” The password alteration is done successfully.
Note: The system prompts “ The new password is not identical with the confirmation” when the two
input passwords are not identical. At the moment, input the new password again.
3) Operation grade degradation
The degradation is to degrade from the high to the low, and its steps are shown below:
a) Input the password according the method of “Operation grade entry” after the system
enters the setting page;
b) Move the cursor to the line “CURRENT LEVEL” and the system pops up
as follows:
c) Press
（
or
）
, and the CNC prompts “Password degrades one grade”
as follows: