GSK GSK980TDc, Manual

Page: 296 / 470

GSK980TDc Turning CNC System User Manual
276
Ⅱ
Operation
Method 1: Press or to enter the page containing the parameter to be set, press
or key to move the cursor to the parameter number to be set;
Method 2: Press (or ) , and input the parameter number in the
pop-up dialogue box, at last, press .
4) Key in a new parameter value;
5) Press key, the parameter value is entered and displayed.
6) For security, the PARM SWT needs to be set to OFF after all parameter settings are
finished.
Example:
Set the bit parameter No.001 Bit 3(STEP/MPG) to 1, and the other bits remain unchanged.
Move the cursor to No.001, input 00011000 by sequence according to the above steps. The
display is shown below:
Press to finish the parameter alteration. The page is shown below: