GRASS VALLEY JUPITER -, Installation And Operating Manual

Page: 187 / 310

JUPITER CM-4400 Control Module Installation and Operating Manual 187
The Control Panel Category Set
Changing the Category Set Associated with an Input or Output Set
A custom Category Set can be created at any time. The following procedure
is used to assign a new Category Set to an existing CP Input Set or CP
Output Set.
1.
Select the Input or Output radio button in the Type of Set area of the
dialog. The names of any previously created inputs or outputs will then
appear in the Categories Sets: window.
2. Select the name of the existing set of interest.
3.
Enter the name of the new Category set in the Name field.
4. Select the appropriate option from the CP Type drop-down list. If you
want to return to the factory default category set, leave the Category Set
name as “Default.”
5.
Save your changes and then click the
OK
button.
Figure 134. Control Panel Sets - New Sequence
6. Click the Open Table button to open the sequence. The Sequence Set table
will then appear.
Figure 135. Category Sets Table
1
Category Set − 3200-CAT
VTR
2
3
19
Font
Net
Aud
Mnemonic
071876600_CategorySe
tsTable