GRASS VALLEY JUPITER -, Installation And Operating Manual

Page: 156 / 310

156 JUPITER CM-4400 Control Module Installation and Operating Manual
Section 5 — The Configurator Application
Switcher Description Table
The Switcher Description table must be used when the CM-4400 is first con-
nected to a distribution switcher.
Note Some of the functions described in this section may be extra-cost options.
Contact your Grass Valley Representative for more information.
Each logical level number of the switcher is given a user-specified name
that can be up to eight characters in length, and the system is provided with
detailed information about each level.
Note In previous releases of the Jupiter system, a router or Levels had to be
defined in the Switcher Description table for each board. In the 7.8.1 version
and later releases of Jupiter, an AccuSwitch board will run without requiring
a configured Level for the AccuSwitch board.
Figure 111. Example of the Switcher Description Table
Entering Switcher Levels Descriptions
In most cases, you will want to modify the set that is currently active; if so,
you may want to copy the active set and select the copy for editing. For
more information, please see
Copying a Configuration Set for Editing on
page 130 .
Note On the top of the Jupiter Configurator window on the title bar, you will see the
name of the Configuration set. Check to see whether the configuration set
that you want to change is selected.
Follow these steps to enter the Switcher Level’s descriptions:
1. Select the Switcher Description option of the Jupiter menu (Jupiter >
Switcher Description). This will open a table similar to that shown in
Figure 111 .
Logical Level
Number
Logical Level
Name
Physical Level
Number