GRASS VALLEY JUPITER -, Installation And Operating Manual

Page: 175 / 310

JUPITER CM-4400 Control Module Installation and Operating Manual 175
The Control Panel Input Set
The Control Panel Input Set
The Control Panel (CP) Input Set tables are used to link particular category
/ entry numbers, and mnemonics, to switcher input names.
Categories are classes of inputs/outputs. The factory default category sets
can be used; or, custom category sets can be created. Example: “TEST” as
the category for all test signals. The category is always followed by:
• An entry number, which defines the unit within the category. To con-
tinue with the above “TEST” example, after pressing “TEST,” the oper-
ator presses the “1” key to switch to the color bar input. Note that the
entry number is not the same as the switcher input/output number.
• A mnemonic is an abbreviation, usually with a maximum length of
eight characters, for a particular switcher input or output. This is the
abbreviation that appears in the status windows of the control panels.
Example: “VT01” as a display mnemonic for switcher input 001.
Creating a Input CP Set
For steps activating the Control Panel Set dialog, see Creating a CP Set on
page 171 .
Follow these steps to create an Input CP set:
Figure 124. The Control Panel Set Dialog
1. Select the
Input
radio button in the upper-left corner of the Type of Set
area of the dialog. The names of any previously created Level set will
then appear in the Level Sets: window.
The buttons will then become grayed out.
2. Enter an eight character name for the Input set in the Name field.