GRASS VALLEY JUPITER -, Installation And Operating Manual

Page: 124 / 310

124 JUPITER CM-4400 Control Module Installation and Operating Manual
Section 5 — The Configurator Application
Follow these steps to copy/paste repetitive material:
1.
Select the row number box above where you want to paste.
2. Press the
Insert
key once for each source row that you want to add.
Figure 85. The Selected and Added Rows
3. Select the appropriate Fill command from the Edit menu.
• Edit > Fill Right to fill information to the cells to the right.
• Edit > Fill Down to fill information to the cells below.
Increment Command
The Increment command is used to automatically create incrementing
numbers in columns to the right or rows below as preferred. For example,
on the Switcher Input table you could enter the text SRC-0 in the Logical
Input Name column, which is located in the top left of the table. Then
selecting the preferred fields (the whole column in this example) and then
the Increment Down (Edit > Increment Down). This selection will fill the
rest of the column with SRC- 2, SRC- 3, and so forth, to the bottom of the
table.
Follow these steps to created incrementing numbers:
1.
Enter numbered text in a column.
2. Select the rows that you want to increment.
3.
Select the appropriate Increment command from the Edit menu.
• Edit > Increment Right to increment the numbers in the cells to the
right.
• Edit > Increment Down to increment the numbers in the cells below.