GRASS VALLEY JUPITER -, Installation And Operating Manual

Page: 118 / 310

118 JUPITER CM-4400 Control Module Installation and Operating Manual
Section 5 — The Configurator Application
Figure 82. The Jupiter Menu - Network Description Table
If a password entry menu appears, it means that a Jupiter password (other
than the factory default of “999999”) has been set. Enter the authorized
password and then click the
OK
button. The password system is discussed
in Passwords on page 143 .
The configuration set should now be edited as appropriate and made active
(downloaded) as described in the
Configurator Editing Guidelines section.
Closing the Configurator Application
To close (or quit) the Configurator application, select the Exit option from
the File menu (File > Exit) or click the Close Box (The red X) in the upper
right-hand corner of the window.
There is no need to leave the Configurator loaded after compiling; other
than for your convenience. However, the JNS application should be left
running and the download connection to the CM-4400 System Controller
should be left in place. This practice is in case the CM-4400’s controller
board requests a fresh download of data from the file server.