GRASS VALLEY JUPITER -, Installation And Operating Manual

Page: 103 / 310

JUPITER CM-4400 Control Module Installation and Operating Manual 103
Restart Procedures
Restart Procedures
There are four ways to reset the CM-4400 controller (these steps are listed
in the preferred order of operation):
1. Selecting the Reboot option in the Jupiter software.
2.
Pressing the front panel’s
Reset
button.
3. Power cycling the CM.
4.
Using the Console port.
These steps are described below.
During a restart, the CM will test itself and, depending on the result, may
request a new download from the file server.
Selecting the Reboot Option
There are two methods to rebooting the Control module, both methods are
described below.
The Configuration Tab
Follow these steps to select the Reboot option:
1. Start the Control Center (Go to Start > Programs > Jupiter Network
Suite > JNS Applications > Control Center).
2. Select the Configuration tab.
Figure 65. The Configuration Tab of the Control Center Application
3. Click the
Reboot
button in the middle of the Control Center dialog
( Figure 65 ). This will reset all controllers in the system.