GRASS VALLEY JUPITER -, Installation And Operating Manual

Page: 173 / 310

JUPITER CM-4400 Control Module Installation and Operating Manual 173
The Control Panel Level Set
The Control Panel Level Set
The CP Level Set table is used to assign levels to control panels. In most
cases, control panels are allowed to control all levels, but creating multiple
CP Level Sets allows restricting control to certain levels. Level Sets are
assigned to individual control panels on the MPK Devices table.
For steps activating the Control Panel Set dialog, see Creating a CP Set on
page 171 .
Follow these steps to create a Level set:
1.
Select the
Level
radio button in the upper-right corner of the Type of Set
area of the dialog. The names of any previously created Level set will
then appear in the Level Sets: window.
2. Enter an eight character name for the Level set in the Name field.
3.
Select a Category set from the CP Type drop-down list or use the
“default” option.
4.
Click the
Apply
button ( Figure 122 ). The name of the new level will then
appear in the Level Sets: window.
Figure 122. The Control Panel Set Dialog-Create Level Set
5. Select the new Level table and then click the
Open Table
button. The Level
Set table will then open.
Figure 123. The Control Panel Set Dialog-Create Level Set
1
CP Level Set — KXYZ−LVL
Mnemonic Level Break Switch
2
3
VID VIDEO (MAINROUT)
LEFT LEFT (MAINROUT)
RGHT RIGHT (MAINROUT)
4 TC TC (MAINROUT)
071876600_CPLevel.