GRASS VALLEY JUPITER -, Installation And Operating Manual

Page: 127 / 310

JUPITER CM-4400 Control Module Installation and Operating Manual 127
AccuSwitch Configuration File Overview
Copy and Paste Rows between the Windows Clipboard and Jupiter
Note Before copying from a Windows program to Jupiter, be sure to read the
Caution paragraph directly under
Reordering Jupiter Tables on page 121 .
You can use the Cut, Copy, and Paste commands to exchange information
between Jupiter and other Windows programs such as Microsoft Word and
Microsoft Excel. For example, suppose you want to create a Jupiter CP
Input Set using Microsoft Word or another Windows text editor. The docu-
ment might look similar to the following
VTR -0 -src-00-src-0
VTR -1 -src-1 -src-1
VTR -2 -src-2 -src-2
VTR -3 -src-3 -src-3
VTR -4 -src-4 -src-4
VTR -5 -src-5 -src-5
VTR -6 -src-6 -src-6
VTR -7 -src-7 -src-7
VTR -8 -src-8 -src-8
VTR -9 -src-9 -src-9
The text must be Tab−delimited (as indicated in the text above by the
dashes); spaces must not be used between columns. In the case of a Micro-
soft Excel or other Windows spreadsheet document, each field would be
entered in a separate cell.
Follow these steps to copy and paste rows between the Windows clipboard
and Jupiter:
1. Select the preferred text and make a note of how many rows you have
selected.
2. Use the Copy command under the Edit menu (Edit> Copy).
3. Select the Jupiter CP Input Set window and then select the row number
box above where you want to paste.
• If you want to insert new rows, press the Insert key on the keyboard
once for each row that was copied and to be pasted.
4.
Use the Paste command under the Edit menu (Edit> Paste). The results
of this act are shown in
Figure 89 .