2-11
Supplement
The meda must always be postoned over
the meda sensor.
See "2.4 Algnng the Push Rollers"
P.2-16
about the poston of the push rollers.
See "2.4 Algnng the Push Rollers"
P.2-16
for nformaton about center 3 push roller
hold-down force.
7
Poston the meda and the push rollers to correspond wth
the wdth of the meda.
Use the 5 push rollers to push down the sdes and center of
the meda. Use the grt roller poston gude and make sure
the push rollers are on top of the grt rollers.
Use the grt roller poston gude to make sure the push
rollers are set on top of the grt rollers.
You can adjust the center push roller's hold-down force.
Grt roller poston gude
Meda sensor
Push roller
Grt roller
Push roller
(The center push roller s not on top of the grt roller.)
(The center push roller s near the edge.)
(The push roller s on top of the grt roller.)
(The push roller s on top of the grt roller.)
When Feeding Long-axis Media (at exceeds 2 meters)
CAUTION
When settng on nsde more than 30mm, cut
cross s not avalable.
Poston the push rollers at least 15 mm nsde the edges of
the meda.
Push roller
Meda
15 mm
15 mm
