manualshive.com logo in svg

GRAPHTEC CE6000-120AP, User Manual

The GRAPHTEC CE6000-120AP user manual is essential for unlocking the full potential of this cutting-edge plotter. Download the free manual from manualshive.com to learn how to optimize your work with precision and efficiency. Master the art of vinyl cutting and design with this comprehensive guide.

Share
Download
background image

7-6

It can be set to automatcally feed and return the length of the page when the meda s loaded and the meda set 

lever s rased. 

Ths s equal to automatcally perform the "Pre Feed" to prevent the shftng of the meda.

P.4-7

 "Settng the number of pre feeds"

P.4-8

 "Settng paper Ready tme"

P.7-4

 "Perform Automatc Pre Feed When Cut Data s Receved"

P.7-8

 "Settng Feed Speed for Meda Set"

Supplement

Ths settng wll be saved even f the power s shut off.

Operation

Supplement

Perform the settngs n Normal menu.

  1 

Press the [PAUSE/MENU] key.

 MENU screen s dsplayed.

  2 

Press the [4] key (MEDIA).

 MEDIA SETTING screen (1/3) s dsplayed.

  3 

Press the POSITION ( ) key.

 MEDIA SETTING screen (2/3) s dsplayed.

 

  4 

Press the [4] key (INITIAL FEED).

 INITIAL FEED screen s dsplayed.

  5 

Set the mode by pressng the [1] key (ON) or the [2] key (OFF).

7.3 

Perform Automatic Pre Feed When Media 

is Set (Initial Feed)

Summary of Contents for CE6000-120AP




































































































































































































































Reviews:

No comments

Related manuals for CE6000-120AP

Brands by name

Popular brands

Load more brands