5-2
For axs adjustment, the nclnaton of the axs can be adjusted based on the coordnaton of 2 grt and/or
regstratons marks. Furthermore, t's possble to adjust the dstance by enterng the dstance of each pont.
Move the tp of each tool to the approprate pont.
Use media that has the plots (grits or alignment marks) required to find the X-Y axis and the origin.
Alignment registration mark
There are two alignment marks. The position of each alignment mark is shown in the next figure.
2POINTS
Frst pont or orgn pont
Second pont
Example of axis adjustment
The pre and post adjustment grd appears as follows
Meda already cut and set agan
Adjustment pont 1
(Orgn pont of the meda already cut)
Adjustment
pont 2
Orgn pont
Reference of ths unt
Cuttng
standards
Adjustng the
coordnate axes
New orgn pont
There s a devaton between the X-Y axs and orgn pont
of the unt and the meda plotted.
To elmnate the devaton, correct the devatons of the
X-Y axs and orgn pont.
5.1
Outline of Manual Position Adjust
