VI
To use a media wider than 1,119 mm
When using the left grit roller, set the push roller to the position of 2 mm from the right edge (A in the figure
below).
Depending on the media size, adjust the position of the push roller of the long right grit roller.
Push roller
Meda
2mm
Grt roller (Rght-sde longer)
Grt roller (Left)
Adjust
(A)
Notes on the left grit roller
The left grt roller s not avalable n all locatons.
It's not possible to set the right edge of the grit roller to a size greater than 8 mm. (There is a stopper.)
Please set the push roller to the poston between 2 mm and 8 mm from the rght edge of the grt roller.
Push roller
Grt roller
8 mm or more
Meda
Push roller
Grt roller
2 mm to 8 mm
Meda
OK
NG
Notes on the crosscut
When settng the push roller to the left grt roller, the length of the crosscut wll be as follows.
Please note the poston you want to set the meda.
• When the poston to set the push roller s 2 mm to 4 mm or less from the rght edge of the grt roller, the
crosscut from the left edge of the push roller wll be 15 mm.
Push roller
Grt roller
2 mm to 4 mm or less
15 mm
Meda
• When the poston to set the push roller s 4 mm or more to 8 mm from the rght-sde of the grt roller, the
crosscut from the left-sde of the push roller s 10 mm.
Push roller
Grt roller
4 mm or more to 8 mm
10 mm
Meda
