2-36
Setting the Acceleration
Set the acceleraton of the tool that s used n each of the tool condton numbers.
Settng range: 1 to 2
Operation
Supplement
Please select Condton No.1 under "Selectng
the Tool Condtons" when settng up tool
condtons for the pen plunger, and select from
Condton No.2 to Condton No.8 when settng
up the tool condtons for the cutter plunger.
For more nformaton, see "2.10 Selectng Tool
Condton"
P.2-29
.
1
Press the [COND/TEST] key n the default screen.
CONDITION settng screen (1/3) s dsplayed.
2
Press the POSITION ( ) key.
CONDITION settng screen (2/3) s dsplayed.
Supplement
It wll return to CONDITION screen (2/3)
wthout changng the settngs when you press
the [4] key (CANCEL) .
3
Press the [1] key (ACCELERATION).
ACCEL settng screen s dsplayed.
* Dsplay may vary dependng on the selected tool condton number.
4
Press the POSITION ( ) key and select the tool condton
number (CONDITION No.).
Supplement
Gudelne to set acceleraton
See "Settng the Tool Condton"
P.2-30
.
5
Press the POSITION (
) key and ncrease or decrease the
settng value.
6
Confirm the setting and press the [ENTER] key (SET).
Settng wll be set, and t wll return to CONDITION screen (2/3).
7
Press the [COND/TEST] key.
It wll return to default screen.
