2-17
When Feeding Long-axis Media (at least 2 meters)
CAUTION
When settng on nsde more than 30mm, cut
cross s not avalable.
Poston the push rollers at least 5 mm nsde the edges of the meda.
Push roller
Meda
5 mm
5 mm
To use a paper wider than 1,119 mm
Carefully set the poston of the left edge of the push roller.
Set the rght edge of the grt roller between 2 mm and 8 mm.
It's not possible to set the right edge of the grit roller to a size greater than 8 mm. (There is a stopper.)
Push roller
Grt roller
2 mm to 8 mm
Meda
CAUTION
Notes on the left grt roller
The left grt roller s not avalable n all locatons.
It's not possible to set the right edge of the grit roller to a size greater than 8 mm. (There is a stopper.)
Please set the push roller to the poston between 2 mm and 8 mm from the rght edge of the grt roller.
Push roller
Grt roller
8 mm or more
Meda
Push roller
Grt roller
2 mm to 8 mm
Meda
OK
NG
For minimum width media
The CE6000-120AP can take media of 594 mm (A1 size) or more.
CAUTION
The meda must be at least 125 mm n length n meda feed drecton.
The meda must always be postoned over the meda sensor.
