4-3
4
Press the POSITION (
) key and move the tool carrage
to the poston to be the lower left of the AREA.
5
Press the [ENTER] key (SET) once the tool carrage s n
correct poston.
SET UPPER RIGHT screen s dsplayed.
Supplement
Please set the X and Y cut range for the areas
on the upper rght and lower left ponts to at
least 10 mm.
An error message wll appear for areas that
are too small.
You wll need to reset the settngs for the upper
rght and lower left ponts.
6
Press the POSITION (
) key and move the tool carrage
to the upper rght poston of the AREA.
Supplement
It wll return to AREA PARAMETERS settng
screen (1/1) wthout changng the settngs
when you press the [4] key (CANCEL).
7
Press the [ENTER] key (SET) once the tool carrage s n
correct poston.
Settng wll be set, and t wll return to AREA PARAMETER screen (1/1).
8
Press the [PAUSE/MENU] key.
It wll return to default screen.
