6-5
7
Press the [2] key (START).
Overcut length for START settng screen s dsplayed.
Supplement
Settng range s from 0.0 mm to 0.9 mm.
8
Press the POSITION (
) key and ncrease or decrease the
settng value.
9
Confirm the setting value, and press the POSITION (
) key
(PREVIOUS).
Length for overcut START s selected and return to OVERCUT settng
screen.
10
Press the [3] key (END).
Overcut length for END settng screen s dsplayed.
Supplement
Settng range s from 0.0 mm to 0.9 mm.
11
Press the POSITION (
) key and ncrease or decrease the
settng value.
12
Confirm the setting value, and press the POSITION (
) key
(PREVIOUS).
Length for overcut END s selected and return to OVERCUT settng
screen.
13
Repeat steps 3 to 12 as necessary to set multple tool
CONDITION No.
Supplement
It wll return to CONDITION screen (2/3)
wthout changng the settngs when you press
the POSITION ( ) key (CANCEL).
14
Confirm the setting and press the [ENTER] key (SET).
Settng wll be set, and t wll return to CONDITION settng screen (2/3).
15
Press the [COND/TEST] key.
It wll return to default screen.
