2-29
Tool condton can remember up to 8 settngs.
Changng these settngs allows you to make the proper settngs for each dfferent type of meda.
Selecting Tool Condition
Condition No.1 applies specifically to use of the pen plunger for the either oil-based ballpoint pen or water based
fiber-tip pen.
Condition No.2 to No.8 applies specifically to the use of the cutter plunger.
Operation
Supplement
CONDITION No. can also be changed from
READY status. See "Changng CONDITION
No."
P.3-6
.
1
Press the [COND/TEST] key n the default screen.
CONDITION settng screen (1/3) s dsplayed.
2
Press the [1] key (Condton No.).
CONDITION No. selecton screen s dsplayed.
Supplement
It wll return to CONDITION screen wthout
changng the settngs when you press the
POSITION ( ) key (CANCEL) .
3
Press the POSITION (
) key and select the settng
(CONDITION No.).
4
Confirm the setting and press the [ENTER] key (SET).
Settng wll be set, and t wll return to CONDITION screen (1/3)
5
Press the [COND/TEST] key.
It wll return to default screen.
2.10
Selecting Tool Condition
