gefran SIEIDrive ADV100, Functions Description And Parameters List

Page: 135 / 172

ADV100 • Functions description and parameters list
135
STS_ALM_STOP 13
STS_ALM_FSTOP 14
STS_ALM_R_TO_NORMAL 15
STS_READY_START 16
STS_READY_FSTOP 17
STS_ALM_NO_RESTART 18
STS_FS_MAGN_START 19
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
1062 Drive OK BIT 16 0 0 1 ER
This signal is active when the drive is in the “OK” condition and no alarms are present.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
1064 Drive ready BIT 16 0 0 1 ER
This signal is active when the drive reference is in the “Ready” to run condition.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
1110 Digital input E mon BIT 16 0 0 1 ER
1210 Digital input 1X mon BIT 16 0 0 1 ER
1212 Digital input 2X mon BIT 16 0 0 1 ER
1214 Digital input 3X mon BIT 16 0 0 1 ER
1216 Digital input 4X mon BIT 16 0 0 1 ER
1218 Digital input 5X mon BIT 16 0 0 1 ER
1220 Digital input 6X mon BIT 16 0 0 1 ER
1222 Digital input 7X mon BIT 16 0 0 1 ER
1224 Digital input 8X mon BIT 16 0 0 1 ER
These signals represent the state of the corresponding digital input on the expansion card..
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
1630 Analog inp1X BIT 16 0 0 1 ER
This signal is active when the value of the analog input is below the threshold set in parameter 1620 Analog inp 1X thr .
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
1680 Analog inp2X BIT 16 0 0 1 ER
This signal is active when the value of the analog input is below the threshold set in parameter
1670 Analog inp 2X thr.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
2388 Torque ref nofilter perc FLOAT 16 0 0 0 ER
The torque control reference current without filter is displayed (in sensorless vector and field-oriented vector mode).
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
3180 Brake control mon rpm INT16 16 0 0 1 ER
This parameter displays the status of the brake command.
0 Brake closed
1 Brake open