gefran SIEIDrive ADV100, Functions Description And Parameters List

Page: 114 / 172

114
ADV100 • Functions description and parameters list
Not all alarms allow the controlled stopping of the drive. The following table shows the possibility of setting the Activi-
ties for the individual alarm signals.
Alarm Ignore Warning Disable drive Stop Fast stop
ExtFlt ü ü ü ü ü
Motor OT ü ü ü ü ü
Overspeed ü ü ü ü ü
SpdRefLoss ü ü ü ü ü
SpdFbkLoss ü ü ü ü ü
Drive ovld ü ü ü ü ü
Motor ovld ü ü ü ü ü
Bres ovld
ü ü ü ü ü
HTsens - - ü ü ü
InAir ü ü ü ü ü
Desat - - ü - -
IOverC - - ü - -
OverV - - ü - -
UnderV - - ü - -
PhLoss
ü ü ü ü ü
GroundFault thr - - ü - -
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
24.1 4500 Fault reset src LINK 16 1218 0 16384 RW FVS
Selection of the origin (source) of the signal to be used for the command to reset the drive after an alarm. The termi-
nal that can be used for this function can be selected from among those listed in the “ L_DIGSEL2 ” selection list.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
24.2 4502 ExtFlt src LINK 16 6000 0 16384 RW FVS
Selection of the origin (source) of the signal to be used as the input for the drive external fault alarm ExtFlt . The
terminal that can be used for this function can be selected from among those listed in the “ L_DIGSEL2 ” selection list.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
24.3 4504 ExtFlt activity ENUM Disable 0 4 RW FVS
Setting of the behaviour of the drive in the event of an external fault alarm ExtFlt . This alarm indicates the interven-
tion of a drive external protection.
0 Ignore
1 Warning
2 Disable
3 Stop
4 Fast stop
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
24.4 4506 ExtFlt restart ENUM Disable 0 1 RW FVS
Enabling of automatic restart after the external fault alarm ExtFlt
0 Disable
1 Enable