gefran SIEIDrive ADV100, Functions Description And Parameters List

Page: 133 / 172

ADV100 • Functions description and parameters list
133
PARAMETERS ON SELECTION LISTS, BUT NOT DISPLAYED ON KEYPAD
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
262 Motor speed nofilter rpm INT16 16 0 0 0 ER
This parameter indicates the unfiltered motor speed.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
362 Drive overload trip BIT 16 0 0 1 ER
This signal indicates that the drive is in the overload condition. In the default condition the alarm is not triggered as
the relative action is set to Ignore .
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
366 Drive overload 80 BIT 16 0 0 1 ER
This signal indicates that the drive has reached 80% of the thermal image accumulator (drive overload).
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
626 Ramp ref out mon rpm INT16 16 0 0 0 ER
This parameter displays the reference value output of the ramp remference function block.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
760 Ramp out mon rpm INT16 16 0 0 0 ER
This parameter displays the reference value output of the ramp function block.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
764 Ramp acc state BIT 16 0 0 1 ER
This signal indicates whether the acceleration ramp is active.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
766 SRamp dec state BIT 16 0 0 1 ER
This signal indicates whether the deceleration ramp is active.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
934 Ref is 0 BIT 16 0 0 1 ER
This signal is active when the reference is below the limit set in parameter 930 Reference 0 threshold .
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
936 Ref is 0 delay BIT 16 0 0 1 ER
This parameter is active when the reference is below the threshold set in parameter 930 Reference 0 threshold .
The signal is enabled after the delay set with parameter 932 Reference delay 0 .
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
944 Speed is 0 BIT 16 0 0 1 ER
This parameter is active when the speed is below the threshold set in parameter
940 Speed 0 threshold
.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
946 Speed is 0 delay BIT 16 0 0 1 ER
This signal is active when the reference is below the threshold set in parameter 940 Speed 0 threshold . The signal
is activated after the delay set in parameter 942 Speed 0 delay .