F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999
Page 8 - 5
Maintenance
d) Since the safety shields are raised and the
tables removed, you must use the footswitch to
rotate the bottom rollers after cleaning a
section.
Speed is controlled through the variable
speed footswitch when the safety shield
is in the raised position.
CAUTION
Method 2
a) Allow the laminator to cool slightly to no
higher than 110
o
F ( 43
o
C ).
T O P T E M P .
B O T . T E M P
S L E E P
< 1 1 0
< 1 1 0
b) Set the motion direction to REV
t
.
F W R
R E V .
S T O P
G O
S P E E D
S A F E T Y
00.0
W A R N I N G
Keep hands and fingers clear of the
laminator roller nip when changing GAP.
Y o u c a n b e C R U S H E D o r B U R N E D !
b) Set the nip of the rollers to the thickness of the
adhesive coated boards.
G A P
P R E S S U R E
1/4
W A R N I N G
Keep hands and fingers clear of
the laminator roller nip when
a d j u s t i n g P R E S S U R E .
Y o u c a n b e C R U S H E D o r B U R N E D !
c) Using the variable speed footswitch, run
the adhesive coated boards through the rolls.
d) Do this as many times as needed to clean the
laminator rolls.
