F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999
Page 6 - 3
Applications
Figure 6.1.2 Unwind shaft
Core chucks
Core support
Clevis pin
Brake adjust
knob
Roll of
adhesive
Saddle
i) Once loaded, swing the upper unwind shaft back
into the saddle.
Ensure the roll of laminate is loaded
properly on the unwind shaft.
Exposed adhesive should be facing
away from the rollers.
This will prevent hours of roll cleaning!
CAUTION
j) Push the clevis pin back down to secure the
unwind shaft in its saddle.
k) Raise the front safety shield.
Caution should always be exercised
when using the laminator with
the safety shields raised.
You can be seriously HURT or INJURED!
W A R N I N G
If you have the parameters stored as a
JOB number enter it now then press
SEL and skip to step " o ", other wise
continue with step " l".
INFORMATION
l) Press SEL. SEL will stop flashing.
S E L
S A V
S H U T D O W N
0
J O B
W A R N I N G
Keep hands and fingers clear of the
laminator roller nip when changing GAP.
Y o u c a n C R U S H E D o r B U R N E D !
