![background image](http://html1.mh-extra.com/html/gbc/f-160/f-160_operation-and-maintenance-manual_3937275021.webp)
Safety
F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999
Page 1 - 6
INFORMATION
Do not put packing screws on the floor.
They can cause problems when trying to roll
the laminator into position or you can
become injured if stepped on.
CAUTION
A second person must support the side
labeled 5 in Figure 4.4.1 It can fall and
damage the laminator or cause harm to you
and others.
W A R N I N G
The Falcon 160 Laminator is a large and
heavy piece of equipment. It is necessary to
e m p l o y L I C E N S E D R I G G E R S O N L Y t o
move the laminator. The laminator is not
designed to be tipped up or sideways in any
way. Such action disturbs the exact
alignment of the rolling parts of the machine
and requires extensive realignment. You can
be crushed or seriously injured.
GBC Pro-Tech's warranty does not cover
malfunction of the equipment due to
mishandling and / or tipping. GBC Pro-
Tech bears no responsibility for personal
injury or damage due to moving the
laminator improperly.
INFORMATION
CAUTION
Do not allow the top to fall into the crate. It
can damage the laminator.
W A R N I N G
Do not attempt to use the ramps if they are
not secured to the pallet. Make sure you
have the pallet on a flat even surface before
attempting to roll the machine off using the
ramps.
About recycling: The crate components can
be reused for shipping the laminator again
or can be disassembled and the wood and
screws recycled. The shrink wrap is not
recyclable, so it must be discarded.
INFORMATION
Improper leveling, will result in poor
output quality.
INFORMATION