F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999
Page 4 - 6
Installation
4.4 Crated
Tools required
• # 2 Phillips head screwdriver
• 7/8” open end wrench or adjustable wrench
• Crow bar
• A second person
To uncrate the laminator
a) Remove the top of the crate and then the sides
in the order shown in Figure 4.4.1
CAUTION
Do not allow the top to fall into the crate. It
can damage the laminator.
INFORMATION
Do not put packing screws on the floor.
They can cause problems when trying to roll
the laminator into position or you can
become injured if stepped on.
CAUTION
A second person must support the side
labeled 5 in Figure 4.4.1 It can fall and
damage the laminator or cause harm to you
and others.
Figure 4.4.1 Disassembling of the crate
P
l
a
n
e
4
P
l
a
n
e
4
Pl
a
n
e
4
1
2
3
4
5
Removing the shrink wrap
a) Gently unwrap the shrink wrap from around the
laminator.
CAUTION
Do not use a knife or other sharp object to
remove the shrink wrap from around the
laminator. You can cause irreparable
damage to the rollers.
