![background image](http://html1.mh-extra.com/html/gbc/f-160/f-160_operation-and-maintenance-manual_3937275024.webp)
F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999
Page 1 - 9
Safety
Speed is controlled through the variable
speed footswitch when the safety shield
is in the raised position.
CAUTION
Caution should always be exercised
when using the laminator with
the safety shields raised.
You can be seriously HURT or INJURED!
W A R N I N G
INFORMATION
When a safety shield is raised while pressing
on the variable speed footswitch, the speed
may be faster or slower than the indicated
panel speed.
INFORMATION
When the safety shield is raised, the
laminator will only run while the variable
speed footswitch is depressed.
INFORMATION
Footswitch speed is not indicated in the
SPEED DISPLAY on the control panel.
INFORMATION
When the safety shield is lowered, speed
reverts to the panel speed setting.
W A R N I N G
At these temperatures there is a danger
ofsevere burn if the rolls are touched
duringsetup, operation or servicing.
INFORMATION
W h e n a n E M E R G E N C Y S T O P i s e n g a g e d ,
all motion stops. The nip will not change
from the operating setting.
INFORMATION
Twisting the roll of film while sliding
makes loading the film onto the
unwind shaft easier.