![background image](http://html1.mh-extra.com/html/gbc/f-160/f-160_operation-and-maintenance-manual_3937275219.webp)
F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999
Page 8 - 2
Maintenance
8.2 Cleaning the rollers
Tools required
• Adhesive coated boards
( picks up dust and particles off of the rolls )
• Protective rubber gloves
( This will protect your hands from the isopropyl
alcohol )
• 80% isopropyl alcohol
( a mild dishwashing detergent and water may
be used instead )
• Rubber cement eraser
( a belt sander dressing block may be used
instead )
• Several 100% cotton terry cloths
( best for lint free cleaning )
Preparation of the laminator
a) Turn the MAIN POWER to the “ON”
position.
P o w e r
b) Press RESET. The front control panel will
illuminated.
Reset
c) Press SEL.
S E L
S A V
S H U T D O W N
0
J O B
=
Flashing
Caution should always be exercised
when using the laminator with
the safety shields raised.
You can be seriously HURT or INJURED!
W A R N I N G
d) Open the front and rear safety shields.
e) Remove the front and rear tables.