![background image](http://html1.mh-extra.com/html/gbc/f-160/f-160_operation-and-maintenance-manual_3937275199.webp)
© GBC Pro - Tech August 1999
Page 6 - 110
F - 160 Operation and Maintenance Manual
Applications
Parameter Chart 7 - Precoating substrates ( Thermal )
T E M P E R A T U R E
GAP & PRESSURE
MOTOR DIRECTION & SPEED
T O P T E M P .
B O T . T E M P .
P R E S S U R E
G A P
S P E E D
F W D
R E V .
G O
G O
= Panel
SOLID
F L A S
H I N G
= Footswitch
PULL ROLL SETTINGS
N O T E S
N / A
1/4 Turn
1/2 Turn
3/4 Turn
P R E S S U R E
MATERIALS
U P P E R U N W I N D :
L O W E R U N W I N D :
S U B S T R A T E :
P R I N T S :
Hot Tissue Mount
N / A
1 / 4 " F o a m C o r e
N / A
1 4 0
6 8
1/4
00.0
Upper unwind material may be sibstituted with similar product. Substrate can vary. Top temperature will vary
slighly between 140 - 160
o
F. Gap will be dependent on the substrate thickness. Pressure will be determined
by the operator. Speed is not indicated in Footswitch mode. Because the process is described from the front
of the laminator, motor direction is FWD and the pull rolls are not required for this application.
D O W N
U P