![background image](http://html1.mh-extra.com/html/gbc/f-160/f-160_operation-and-maintenance-manual_3937275164.webp)
F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999
Page 6 - 75
Applications
Speed is controlled through the variable
speed footswitch when the safety shield
is in the raised position.
CAUTION
W A R N I N G
Keep hands and fingers clear of
the laminator roller nip when
a d j u s t i n g P R E S S U R E .
Y o u c a n b e C R U S H E D o r B U R N E D !
h) When the cardboard has traveled pass the main
rollers, press PRESSURE
t
t
t
t
t
to set a pressure
of 60 - 80%.
G A P
P R E S S U R E
0
CAUTION
Excess pressure can damage the laminating
rollers. Always use the minimum roll
pressure necessary to complete the task.
W A R N I N G
Keep hands and fingers clear of the pull
roller nip when changing the gap.
Y o u c a n b e C R U S H E D !
i) Once the cardboard has passed through the pull
rollers, lower the upper pull roller onto the web.
Turn the pull roll crank handle 3/4 turn
clockwise after you feel the initial contact. Refer
to Figure 6.8.6
PRESSURE will vary with the thickness
and width of the laminate you are using.
Adjust as necessary.
INFORMATION
j) Cut the cardboard from the webbed material.
Refer to figure 6.8.5
CAUTION
Do not use an open blade to cut
the web near the rollers.
You can put cuts into the rollers!