© GBC Pro - Tech August 1999
Page 6 - 38
F - 160 Operation and Maintenance Manual
Applications
e) With the utility knife, make an incision across
the width of the laminate.
CAUTION
Caution should always be exercised
when using a knife .
Sharp knife can cut you!
f) Remove the front infeed table.
g) Pull the laminate straight down toward the front
of the lower main roller. Refer to Figure 6.5.4
Figure 6.5.4 Laminate separation
Laminate
R e m o v e
h) Apply just enough brake tension to prevent the
roll of mount adhesive from free spinning.
Excessive brake tension may cause the
output to curl. This can create complications
with the second pass of this application.
INFORMATION
i) Pull the mount adhesive up towards the upper
main roller and tack it the laminate resting on
the upper main roller. Refer to Figure 6.5.5
The mount adhesive will adhere to the
exposed adhesive from the laminate.
INFORMATION
Figure 6.5.5 Mount adhesive
Laminate
Mount
adhesive
