F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999
Page 4 - 23
Installation
Caution should always be exercised
when using the laminator with
the safety shields raised.
You can be seriously HURT or INJURED!
W A R N I N G
a) Raise the rear safety shield.
b) Lift the clevis pin up from the saddle of the
upper unwind shaft.
Clevis pin
S a d d l e
c) Swing the upper unwind shaft to its fully
extended position. Swing back and reseat the
shaft in the saddle. The swing movement should
be smooth and easy.
d) Ensure that the upper unwind brake adjustment
knob is backed off completly. The counter
clockwise turn should be easy.
INFORMATION
Steps " e" and " f" will be performed
simultaneously.
e) With one hand, slowly turn the upper unwind
shaft in either direction.
f) With the other hand, slowly turn the upper
unwind brake adjustment knob clockwise.
Upper unwind brake
adjustment knob
g) You should feel an increase in resistance on the
turning of the upper unwind shaft as you turn the
upper unwind brake adjustment knob
clockwise.
