![background image](http://html1.mh-extra.com/html/gbc/f-160/f-160_operation-and-maintenance-manual_3937275207.webp)
© GBC Pro - Tech August 1999
Page 6 - 118
F - 160 Operation and Maintenance Manual
Applications
Parameter Chart 11 - Encapsulation
T E M P E R A T U R E
GAP & PRESSURE
MOTOR DIRECTION & SPEED
T O P T E M P .
B O T . T E M P .
P R E S S U R E
G A P
S P E E D
F W D
R E V .
G O
G O
= Panel
SOLID
F L A S
H I N G
= Footswitch
PULL ROLL SETTINGS
N O T E S
N / A
1/4 Turn
1/2 Turn
3/4 Turn
P R E S S U R E
MATERIALS
U P P E R U N W I N D :
L O W E R U N W I N D :
S U B S T R A T E :
P R I N T S :
3 mil Octiva Gloss
N / A
Any type
2 4 0
2 4 0
0
0 - 7
Upper and lower unwind material may be sibstituted with similar products. Top and bottom temperature will
be dependent on film thickness . Pressure may vary acording to the output. Speed will be dependent on
image type. Pull roll pressure will very between 1/2 turn and 3/4 turn, depending on the film output quality.
Because the process is described from the front of the laminator, motor direction is FWD.
D O W N
U P
3 mil Octiva Gloss