![background image](http://html1.mh-extra.com/html/gbc/f-160/f-160_operation-and-maintenance-manual_3937275068.webp)
F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999
Page 5 - 3
Operations
( 11 ) PRESSURE DISPLAY : Displays the amount
of pressure being used. Each bar represents 10% of the
maximum allowable pressure. All ten bars illuminated
equals 100% of the maximum allowable pressure.
G A P
P R E S S U R E
1/4
1 1
INFORMATION
When adjusting the pressure, the gap
will be affected as well.
( 12 ) PRESSURE
s
: When pressed once, will
decrease the pressure by 5%. If held down, it will
decrease from 100% of the maximum allowed pressure
to 0% at which point no bars will be illuminated.
G A P
P R E S S U R E
1/4
1 2
W A R N I N G
Keep hands and fingers clear of
the laminator roller nip when
a d j u s t i n g P R E S S U R E .
Y o u c a n b e C R U S H E D o r B U R N E D !
( 13 ) PRESSURE
t
: When pressed once, will
increase the pressure by 5%. If held down, it will
increase from 0% of the minimum allowed pressure to
100% at which point all bars will be illuminated.
G A P
P R E S S U R E
1/4
1 3
( 14 ) JOB DISPLAY : Displays the job number
selected and will set the operating parameters saved for
that number once SEL has been pressed.
S E L
S A V
S H U T D O W N
5
14
J O B
INFORMATION
Job programming is explained in
Section 5.4