![background image](http://html1.mh-extra.com/html/gbc/f-160/f-160_operation-and-maintenance-manual_3937275154.webp)
F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999
Page 6 - 65
Applications
Excessive pressure will cause the
substrate to bow or flatten.
INFORMATION
w) Press STOP.
F W R
R E V .
S T O P
G O
S P E E D
S A F E T Y
00.0
x) Press REV
t
t
t
t
t
to reverse the direction of the
motor.
F W R
R E V .
S T O P
G O
S P E E D
S A F E T Y
00.0
W A R N I N G
When operating the laminator through the
variable speed footswitch, keep your hands
away from the nip of the rollers. You may
be crushed or burned.
y) Press on the variable speed footswitch to back
the board out of the main rollers.
Speed is controlled through the variable
speed footswitch when the safety shield
is in the raised position.
CAUTION
Process
If you are using precoated Hot Tissue
boards, proceed to step " d )".
INFORMATION
a) Cut a sheet of Hot Tissue the same size as the
image. Refer to Figure 6.7.3
b) Run a thin line of glue across the leading edge of
the substrate. Refer to Figure 6.7.3
The leading edge is the first part of the
board or image that enters the nip
of the rollers.
INFORMATION