Furuno GP-1871F Operator'S Manual Download Page 91

Page: 91 / 97

10. NOTIFICATIONS

10-8

• System Errors

• Informative Notifications (System information)

Position Lost

Heading Lost

Radar Connection Lost

Radar Trigger Error

Radar Video Error

Radar Headline Error

Radar Azimuth Error

NAVpilot Connection Lost

Positioning fix is lost (EPFS signal interrupted or stopped).
Heading is lost (HDG signal interrupted or stopped).

The radar has a problem with the transmission trigger.
There is a problem with the radar video signal.

The radar azimuth is incorrect or faulty.
Disconnected from the NAVpilot or signal is lost/interrupted.

There is a problem with the radar heading line (no HDG signal).

Disconnected from the radar or signal is stopped/interrupted.

MOB

Navigation Mode

NAVpilot STBY

NAVpilot Auto

NAVpilot Nav

Maximum No. of QPs Reached

Maximum No. of Points Reached

Maximum No. of Routes Reached

Max. No. of Route Points Reached

Maximum No. of Tracks Reached

No Chart Detected

SD Card Full

Simulation Mode Active

MOB function is active

A route (Quick or Planned) is active.

NAVpilot is in standby mode.

NAVpilot is in AUTO mode.

NAVpilot is in NAV mode.

Saveable Quick Points have reached maximum capacity.

Saveable User Points have reached maximum capacity.

Saveable routes have reached maximum capacity.

Saveable points in a route have reached maximum capacity.

Saveable tracks have reached maximum capacity.

No chart is detected.

SD card has reached maximum capacity.

Simulation mode is active.

Summary of Contents for GP-1871F


































































































Search results

Summary of Contents for GP-1871F

Reviews:

Related manuals for GP-1871F

Brands by name

Popular brands

Furuno GP-1871F, Operator'S Manual

Search results

Summary of Contents for GP-1871F

Reviews:

Related manuals for GP-1871F

Brands by name

Popular brands