6. FISH FINDER
6-12
3. Set the [Depth] (from transducer) to set the start point for the detection area.
Drag the slider, or tap the keyboard icon to input a value.
4. Set the Range (width) of the detection area in a similar manner.
5. Close the menu.
6.19.3
How to set the fish size notification
The [Fish Size Notification] is triggered when fish meet the criteria set for the ACCU-
FISH
™
filter. See section 7.17.5 to set the criteria.
1. Tap [Home] => [Settings] => [Notifications] => [Fish and Bottom].
2. At [Fish Size Notification], tap the toggle box to show [ON].
3. Close the menu.
6.19.4
How to set the seabed composition alarm
The Bottom Discrimination feature gives you an estimate of the seabed composition
and you can set an alarm to inform you when a certain composition is detected.
1. Tap [Home] => [Settings] => [Notifications] => [Fish and Bottom].
2. At [Bottom Discrimination], tap the toggle box for [Notification] to show [ON]. The
composition types (Sand, Mud, Rock, Gravel) are now active and selectable.
3. Select the composition type you want to trigger the alarm.
4. Set the [Probability] at which the alarm is triggered.
Drag the slider, or tap the keyboard icon to input a value.
5. Close the menu.
6.20
Restoring Factory Defaults
You can reset Fish Finder menu settings back to factory default.
Note:
This procedure resets
ALL
settings in the [Fish Finder] menu to default.
1. Tap [Home] => [Settings] => [Fish Finder] => [Factory Defaults]. A confirmation
message appears.
2. Tap [Yes] to restore the [Fish Finder] menu settings to factory default.
